if you live in Australia, it is highly likely you have already benefited from cps Hire generated nitrogen

From major coffee producers to suppliers of the biggest food companies in the world (& Australia!), you have already tasted our freshness from MAP

Liquid nitrogen deliveries require that the gas be converted to a liquid for truck transport. Upon arrival, the liquid must then be converted back into a gas. This two-time transfer of states because of these filling points – loading into the transport vehicle at the nitrogen facility and unloading again at the pharmaceutical production facility – creates avoidable product waste, not to mention additional charges for delivery.

Nitrogen gas, when delivered to any manufacturing facility, must also be stored on-site prior to use, also creating additional unnecessary waste. Once inside a cooled tank, the loss is often an automatic 10 percent of the delivery volume. And, even with a good vacuum, the tank will lose a minimum of .4 percent of volume daily if internal pressures are allowed to build because the gas remains sedentary. Purging or releasing tank pressure only contributes additional waste as well.

To help outline projected costs and determine the potential savings when shifting to on-site nitrogen generation, equipment providers like CPS Hire (Atlas Copco Authorised Reseller NSW & Australia) can work with facility managers to develop a spreadsheet outlining cost comparisons. This provides a framework of all outlays associated with the process – liquid nitrogen costs per hundred cubic feet, tank rental fees, delivery charges, hazmat charges and other miscellaneous costs.

And consider this: while generating liquid nitrogen requires a tremendous amount of energy, about 80 percent of nitrogen end uses require it as a gas and not a liquid. The primary reason nitrogen is liquefied is for ease of transportation, so shifting to on-site nitrogen generation helps reduce energy costs and lower emissions associated with the facility’s daily operation. Factor in diesel fuel emissions from vehicular traffic needed for delivery of liquid nitrogen, and these benefits compound while increasing the environmental impact on the surrounding communities.

While liquid nitrogen delivery channels have traditionally provided greater product purity – an essential element in pharmaceutical production – over on-site generation, technology has helped boost on-site nitrogen generation purity to close this gap. As a result, higher purities in on-site nitrogen generation are now comparable to the liquid product and, with proper instrumentation, can be measured to ppt levels of oxygen concentration. Ninety-nine percent of all industry applications can be met within the 10 to five ppm levels that can be achieved with a pressure swing adsorption generator.

Shifting to on-site nitrogen generation capabilities is just one way that manufacturing facilities can achieve significant cost savings, with the added benefit of a lower carbon footprint to help lead the way as an environmental steward in the community.

 Still interested? Contact us for a no obligation costing of a new system either by us renting all the equipment for less than your bulk N2 deliver or by providing the cost of outright purchase - you decide. CPScompressors@email.com

 

"Our Bulk N2 deliveries were costing $1250-$1500 per month, we also paid $1600 per month ($3000+ per week) for rental on the N2 receiver vessel. Our new system that we rent from CPS Hire costs us $1600 per month"

Moving from liquid delivery to on-site nitrogen generation in the pharmaceutical industry can reduce costs between 40% and 80%, depending on current liquid nitrogen market prices. While bulk costs for delivered liquid nitrogen can range greatly in cost it is clear that this way of providing N2 is not cheap. There is also the consideration of rental costs and of delivery.  Wouldn't it be nice to never run out again & reduce costs?

On site N2 generation, the smart way!

on site nitrogen generation, the smart solution

Never Run out, Don't worry about refills, Reliable and Costs Less AU$$

FREE SITE EVALUATION, CONTACT US TODAY

are you paying too much for n2 deliveries?

do you order bulk n2 and looking for a more cost effective & reliable option?

If so read on we can save you AU$$$


Reduce the Cost you are paying for this bulk refill and hire of N2 Receiver by generating N2 on site.

Shifting to on-site nitrogen generation capabilities is just one way that manufacturing facilities can achieve significant cost savings, with the added benefit of a lower carbon footprint to help lead the way as an environmental steward in the community.

We offer:

- Rental Long Term, reducing your monthly refill costs

- Sale & Installation of required generation equipment

- We can also Finance the sale of the N2 equipment

Interested? Contact us today for a site visit or we can forward more info & answer any queries (cpscompressors@email.com). Covering NSW.